Oakworks Spine Positioning System II Manuel d'utilisateur

CRESCENT FACE PADCONTOURED TORSO SUPPORT PADCONTOURED TORSO WEDGERADIOLUCENT FRAME WITH ADJUSTABLE FACE RESTCARRY CASE8” X 22” X 2”(20 x 56 x 5 cm)

Open the cam lock on the adjustable face rest and rotate the face rest flat against the base frame. This will protect the face rest support platform d

8IMAGING SCENARIOSPATIENT - ALICIADemonstrates the generous amount of space under the head/face while laying comfortably in the SPS IIAlicia in the SP

PATIENT - DONComponents used: Radiolucent Frame, Crescent Face Pad, Contoured Torso Support Pad, Large Adjuster Pad, 8” Semi-Round Bolster (not pictu

10IMAGING SCENARIOSWARNINGA patient safety strap must be used during all procedures.PATIENT - LIZLiz in the SPS II while obtaining a lateral image of

PATIENT - MARYMary in the SPS II while obtaining an AP image through the C1-2 segmentLateral image through the C1-3 segmentsAP image through the C1-2

12IMAGING SCENARIOSWARNINGA patient safety strap must be used during all procedures.PATIENT - CARLCarl in the SPS II while obtaining an AP image of th

PATIENT - DEBBIEComponents used: Radiolucent Frame, Crescent Face Pad, Contoured Torso Support Pad, Contoured Torso Wedge, Small Adjuster Pad, 8”

14IMAGING SCENARIOSWARNINGA patient safety strap must be used during all procedures.PATIENT - JANEJane in the SPS II while obtaining a lateral image o

15CLEANING & DISINFECTION / INSPECTIONS & MAINTENANCECLEANING & DISINFECTIONBefore cleaning with any liquid cleaner be sure to unplug the

1. Use 1/2” socket wrench to grasp the locknut. 2. Hold the cam with other hand.3. Tighten the cam until there is no gap between the 2 metal parts.Ba

© Copyright 2013 Oakworks® Medical Equipment, a division of Oakworks®, Inc.Printed in U.S.A.All rights are reserved. No part of this document

Manual Part Number: MMMNUP0003Revision Level: A1st Edition, February 20132nd Edition, August 2013English, Printed in U.S.A.FDA ListedCONTACT INFORMA

TABLE OF CONTENTSIntroduction ...

INTRODUCTION / PRODUCT USE DESCRIPTION / SYMBOL IDENTIFICATION1SYMBOL IDENTIFICATIONThis symbol, when used in this manual and on product labels, repre

CAUTIONREAD AND SAVE THESE INSTRUCTIONSA patient safety strap is required during all procedures. Follow normal and required safety protocol for all pr

3PRODUCT DESCRIPTIONSpine Positioning System IISTANDARD SPECIFICATIONSWeight 16 lbs. (7 kg.)Frame with Face Rest 12” (30 cm.) Wide x 32.5” (84 cm.) Lo

Adequate free space under see through face section for aeration, supple-mental oxygen, jaw/face contact as necessary; prevents patient overheat-ing, c

5PRODUCT DESCRIPTIONCONTOURED TORSO WEDGEThe Contoured Torso Wedge is constructed of dense foam This provides enhanced patient stability and convenien

6DIRECTIONS FOR USECAUTIONPREPARATION FOR USEDo not overhang the platform frame beyond the WARNING line on the frame.Unpack and inspect all components